Hydroponic Cucumbers-grow LED lights indoors

I teach 10-12 grade agriculture courses in a high school, so I decided to let my students use LEDs to grow cucumbers in a controlled environment. Hydraulic grille lights. The light I choose for cucumber growth is VANQ T8 light, which can easily cover 2x2. The metal halide or high-pressure sodium lamp T8 with an area of ​​more than 400 watts uses 84 3 watt ultra-high output LEDs, with an expected lifespan of 12 to 15 days, a power of about 130 watts, and the patented six-belt cucumber plant with large leaves and beginning to bloom.

 

The cucumber I chose is a variety called pica lino. It can produce all female flowers without pollination, so it is very suitable for growing indoors or in a greenhouse on the 25th day. Due to powdery mildew, it has removed some leaves. Even with powdery mildew, the plant showed tremendous growth. I was surprised how many flowers bloomed in such a short time on the 30th day, there were no signs of powdery mildew, and many new leaves were replaced. Some cucumbers began to grow.

 

 

The armor-piercing T8 is worthy of the name, because it can penetrate many canopies and induce many flowers and flower buds to be actually loaded. Plant flowers and new buds within 25 days after transplantation. After the cucumbers are removed, they grow at an alarming rate. Picking on the 35th day took 7 to 10 days. We harvested the first batch of grapes and one of my students. In the end, we picked 8 cucumber dat from the vine, which was our last harvest, because the cucumber plant has completely exhausted its life and produced 191 cucumbers. My students and I like to eat fresh things. We also sell it to our employees. With the help of many other cucumber schools, we eventually raised $125 to maintain and support our indoor garden.

 

 

To my surprise, VANQ Hydroponic LED Grow Light T8 can produce 191 cucumbers in an area slightly larger than 4 square feet. In this region, the penetration cost of water and electricity growth T8 is $649 for three years. The 12-year warranty from the day the lights are turned on is only $54 per year. I can easily repay my money within 24 weeks. My class has 3 cucumbers provided by school staff, the price is 5.00 US dollars, they are organic seeds, we do not use any herbicides, pesticides or fungicides, our cucumbers increase the value and demand of our products, to us The demand is so great that I must start reducing the number of people who pay in advance to ensure that if we sell all 191 cucumbers, they will have the next right to pick them. They could have sold 63 bags of luggage for $5 and could raise $115 in 3 days and 80 days.

 

 

You can pay for these two cucumbers. After that, in the next 11 and a half years, for every cucumber planted, the school community association may be a non-profit organization, or even an individual, and a healthy and good organization. The high yield index of a plant is the number of days the roots have grown since the 1980s. The root system of cucumber is the healthiest root system. I see them very white. I am a pioneer in Sookie's contribution to VANQ growers because it generates almost no heat. To help me lower my body temperature, a lot of oxygen enters the VANQ spectrum. Insufficient light can also have a huge impact on plant health and high yields. Looking forward to buying more lights from VANQ from the classroom

 

Build your own growth light

Okay, this is my hydroponic grow light bar on the Costco shelf. This is how they connect. So basically, if you look closely at the plus sign, there will be a plus sign and a minus sign, so there will be a plus sign there, so all you have to do is connect the red wire to the bidirectional black wire and use the minus sign Location, I'm tying them together here just to tell you not to shrink, so you just need to connect them like this, then shrink the wrap, then shrink the wrap and what I put here, and then align them. To keep everything smooth, I didn’t wear a zipper, but all I had to do was put the zipper every few inches to prevent us from falling and connecting together. For power supplies, this is really simple.

 

Our power source is a 12 amp power source. This line is just one line. You can connect three wires to the back of the computer or monitor. Black, white and green, so if you look here, the wire connecting L to black is white, and then the green wire is inserted here, so you can connect these three ways and loosen it, it's easy, you just need to loosen Open any one of the wires, then tighten to tighten the wires, put them in, here you will also see the VV plus sign, so you want the red wires to appear in these V Plus, and you need another root yes , Just like I started inserting it to tell you that this will be a lurking wait. I tell you, this is how you grow and make money. Okay, this is the shelf. As you can see, the red tie is installed. They stay bright now. I just want to tell you the difference between LED lights.

 

 

I installed an LED hydroponic light here. I want to shrink it a bit. If you notice a difference in height, there will be more space between this part and this part for fluorescent lights. In fact, the growth space for plants is relatively small. If you look here, you will find that these pea sprouts are now about 3-4 inches, they still have a lot of room to grow, so they need to be wired here again, so use v- and v+ as roots. Lifted his head in front of him. You demonstrated how to wire and then plug in the main power supply on the left. Just plug in my fluorescent lamp. The lamp here is connected to Yes, the main power supply is to ground the white wire to the end, and then ground the black wire to L. Then all the final Joe is installed here. I will 3D print it separately or just replace it from another shelf

 

Overview 15W Full Spectrum LED Bulb for Planting

Well, this is Andy Li, and this is my article review on Full-spectrum LED grow. VANQ LED light replaces 15 watts, so if you pay attention, the so-called office of the company is very important. Look carefully, you will see a series of installed LEDs, there are a total of 70 78 LEDs, which are blue 432 440 650 to 660 meter nanometer LEDs and red LEDs, some white full spectrum LEDs, some 380 combinations 400 millimeters of ultraviolet and 730 nanometers of infrared. Everything that should replicate the sun at 10 o'clock. The beam direction in the morning is 180 degrees. If you see some aluminum heat sinks on the side of the LED. Using a standard Edison base, the side of the device itself is a bit bulky, but you have high expectations for the cooling capacity of the heat sink, let's see that its weight Doles (Doles) is less than 7 inches, I will power up and display the axis Angle and display after running.

The thermal performance of the lamp depends on how the temperature changes, so I turn on the lamp here, you will see that it looks very bright and has a unique pink appearance. These lights are usually purple-red. Now I'm going to let it run for a while, armor I can measure the spiral fin curiously, but the eyes looking at the power meter are here, to make the power meter say that the power of 4:9 is 15 watts, so this is very effective in the beam pattern , Let us now look at the next white board. Here you can see that I am going to walk a foot in the frame, and what happens is that it completely fills the whiteboard of the foot, about one foot and one foot, so you can see it at 120 degrees, about 120 degrees (120 The white character of the degree) has a good wide spread, and then it can be hung on the plant and not too far away from it.

 

In this way, when you try to sow seedlings or other plants that have already started to grow, let's look at the thermal performance of the sun for about 10 minutes, we will measure the temperature, and the growth light of the brake LED is always on. About 10 minutes, I’m going to illuminate it, we can see the display, this is a small thermal probe, let us point to the tip of the top fin, we can see 88 degrees Fahrenheit, if I point to the front, the temperature is Fahrenheit 101 degrees. As you can see, this works well. I touched it. I have almost no volume, so the radiator can work. This means things will get cooler and will expand greatly. So what is my overall view of the LED? I think it's great. As you can see, the product is cheap, and I prove it works very cool. I will use it to test certain plants, certain growth of certain seedlings, and I am sure it looks like a high-quality integrated product, everything is fine with 15 watt LED light source, so I really like this I plan to give it a five-star rating for my channel.

 

Hope this article review can be helpful to your purchase decision. Thanks for watching

LED plant light: cheap and easy

Hi, I will show you how to set up my indoor plant lighting system using LED lights. I use it to spend the winter indoor plants and start planting seedlings.

Greenhouse LED grow lights are not as full spectrum as the sun. The wavelength is not complete and the plants cannot grow for a long time, but I started to observe things. When I grow lettuce in winter, I grow such vegetables. I also let my succulent plants and other houses pass the winter. Plants like Prolia are really bad, because our house is located in a mountainous area, which is dark in winter, but now it has been produced. I have some young succulent plants. The Coleus from last summer provided me with a full range of information. Sometimes, I will go all out to take them out. Whether it is sunny or sunny, if you live in a place that is too cold, you can put them on a bright window, but I can only dig once a month.

Choose LED bulbs to ensure that the bulb you choose is greater than 5000. The white appearance K will bring yellow to ensure it is bright enough. Choose 2000 lumens or higher. My bulb has 5000 K and 2100 lumens in this video. I will show you how to create a fixed light, but you can also easily create a frame that contains the PVC pipes and other consumables you bought in this store at Home Depot for $20. A pair of 10 LED t8 bulbs. Assemble both ends into the rotating slot until you hear a click. The lamp has a hook for easy installation. We can make a convenient hole in the workbench and insert it into the timer. The timer is twenty dollars. The great thing is that it has two sockets, so we only need to plug in two lights, or in the electric light and the heating pad, to get the power on, because I do have three lights, so I have to go to work. I have three sets of eye hooks.

I hung up the lights from the beginning. I hung up the light a little. It can not only increase the intensity of lighting but also improve the use of e-books. You can also install some factory support equipment, then put the lamp into the hook to help ensure the installation safety, then screw it in place, then connect the chain and hook, and then install the hook to the bulb, and you can start using it. Go where the plants are about one to two inches away from the lights, so I use this book to improve lettuce, grow indoor grow lighting, and start growing vegetables and overwintering indoor plants and succulents.

You need to understand the basics of using LED lights to grow hemp

 

If you might consider upgrading your lighting equipment, or want to get more high-tech or more energy-efficient products, then one of the best things on the market right now is that there is no LED lighting in this video.

I will introduce what you need to know about what to look for when buying LEDs, and at the end of this video, I introduce the advantages and disadvantages to learning how to win free LEDs yourself. The difference between LED and HID is mainly energy efficiency and how to measure energy efficiency, instead of focusing on cooling technology, the measured value of lumens will exceed micromoles per joule.

The industry standard for measuring the light efficiency of growth is micromole joules, which means that there are now a certain number of micromole photons per joule or Y times per second. When you look at the power or light intensity, you can basically measure the photosynthesis of plants. Even with standard power, the amount of usable light released is not necessarily the amount of usable light. If Trey and I am a bit like what I just discussed, then the plants I get now will be generally light, just like where the light is spreading. The science is a bit outdated, but the available light is actually the focus here, so you will get higher efficiency when using light, and power consumption will also be reduced, and your wattage will be less than the number of HIV infections, especially when When you check that you don’t actually use a lot of models or use a lot of things, but some brands are cheaper, especially when you don’t dig things on Amazon, you will find there are $90 lighting equipment there, and think it will be You want products that compete with Thousand Dollar Lighting. When it comes to LED cheap, it is absolutely unrealistic, absolutely cheap, so you may hear me many times on this channel and think that we may have said it on this channel, I want to be honest with you You jump into the LED field and there is no opportunity for bargaining.

There is no your manufacturer because you know that Rob has encountered it there, and when you talk about the measurement of light, you know that it is indeed incomparable. I just want to talk about LEDs, I don't think I can use it. TrumpHPS, I think this is another option. You can combine the two. I know that I will deal with certain cases separately to treat them differently before being with you. I know my personal experience, but, in many cases, when you measure light, you think the same light or the radiation of photosynthesis or people sometimes confuse vin with Kyle or something similar to the sun is actually a measure of PPFD , And PPF tells you how many photons the light source emits per second, also known as ppfd, it tells us how the lamp distributes photons or plants in a 1-meter square target every second, and another thing called DL I tells us every day or day There are many things to know exactly how much light is effectively used in your garden, so this is a brand new portal that we are opening.

Because we have all discussed LEDs, do you know that it is mainly when considering the price of the initial investment, but this is what we consider when making the initial investment? There is an HID. Unlike most LEDs, you will change the ball more frequently. Compared with LEDs that can be used for up to 10 years or more, you can reduce the use a lot. When you have been thinking about replacing your equipment, if you do better in the environment and use LEDs to be more portable and environmentally friendly, then overall it will have a lower temperature, so when the temperature is lower, you will need Less time to replace.

Cooldown the host. In most cases, this is not all but depends on your LED manufacturer, which is why you need to know the manufacturer, and you must know the level of moles in the car, or know exactly what they are from the fixture ( Not just LEDs, not LEDs) provide you with much light. Everyone is absolutely the same, not that I think this is the biggest disadvantage, I think that one of the biggest disadvantages is that you have a gap between the quality of random LEDs. You find that online LEDs are compared with first-class products that you know first-class technology. I really don’t see many people will release energy-saving and high-quality lights, and these lights may not be CMH or called, we are looking for price comparison companies

Do you know the importance of growing cannabis lights?

We described different lighting settings for the growth chamber in another article. Here, we should pay attention to the importance of water to lighting itself.

In the process of photosynthesis, all plants need light to grow and metabolize air. Water and carbon dioxide can help them grow with cannabis plants. You should turn on the electric lights during the day and believe that the night is dark, otherwise the plants do not have to rest, because no matter when you are tired or struggling, the plants cannot grow in the place where hemp is grown.

The lighting time of the cannabis LED grow light depends on the growth period. . The ideal photosynthesis are light orange, orange-yellow, green, blue, indigo and purple. They can make flowers flourish, and it is best to emit green light within a few weeks after flowering, so they respond well to every spectrum. You want to provide at least 250 watts per square meter of lighting, but 1000 watts is the ideal choice.

You need to know that some lights generate a lot of heat to produce 1000 watts of light, so LED Grow lights should be a good choice. In addition, some led light settings allow you to adjust the amount of red and blue, green and green, so once you wish to encourage the flowers to turn blue, the final red will get the best results.

In addition, before gradually reducing the number of dark hours to every 12 hours, 16 hours of light and 8 lights will be used, at which time the yield of buds will reach the best state. Please tell us which color to use in the comments section. Of course, if you like the video below, please make sure to subscribe to our channel so that you can also become a cannabis expert.

Pepper planting-LED and fluorescent light

Hello, welcome to the pea planting room. This is my pepper rack under the LED light. Now I have closed it, otherwise the pictures are all pink, but there are 13 different peppers on my rack, I think I just I only have one of Ithink from Ecuador. I got it from overseas seeds. For some reason, this is the only Ecuador that germinates. I just started farming last month, so I think the rest are as early as 11. Month began.

 

Others are in mid-December, but I have been picking flowers because I don’t want these flowers to produce flowers, because I want the concentration to increase, so you can see that there are many flowers on CajunBelle this special variety, so I need to study carefully Cut them off before they get bigger, some of them I have cut a little bit, others I just let them grow, but the long hair of Cajun Belle and the Italian makes them grow quite fast. After pairing with other varieties, I trim them once or twice, I also put some pepper here,

 

This is used under shop lights on t8 bulbs, these are the same varieties that I grow under LED lights, so I want to compare and show you what is the difference compared to those grown under LED lights, I know A lot of you want to watch a comparison video that shows the difference between peppers grown under LED lights and peppers grown under store lights. Here I have four different varieties of one of each variety grown under LED. The one that grows under the store light, so on the left is the one that grows under the store light. They look very similar. I don’t know if I can talk about it in the video, but the pepper in the store seems to have darker colored leaves. This is a California harvest. Machine, this is something I haven’t trimmed, so it’s a bit tall, but compared to some other varieties, it’s still very dense, and then I’m on the back, I have Brazilian starfish, this peculiar pruning, you can see that I trimmed The place that has been past is also trimmed here. It is also lighter than the one grown under the LED, but it grows again until the height is very similar, so there is no big difference in plant height. Now we turn to Aki lemon or lemon When it is lemon, its left side is darker, but some leaves are bent a bit, and my leaves under the LED light have no problem, so I am not sure what caused the leaves to curl, but I might add some fertilizer to it and see Does it help

 

Then I also have an orange bell pepper, so this one looks very similar, they are the same height, I also trimmed these two and marginalized them A month ago, they became a bit bushy and you can see some flowers start Formation, I need to cut it there, so this is a comparison, so there is not much difference, maybe a little lighter LED, but the height is similar, they all look healthy, the fertilizer I have been using is the harvest efficiency of this organic Neptune Wheat fertilizer, I just mix it with a gallon of water, maybe two teaspoons, I have been watering another thing I am on the shelf here, I have a small bowl with several bowls in it, here are Apple cider vinegar, this needs to be replaced, but the fungus is attracted by apple cider vinegar, so I have a few bowls, here is another one. Fungus is not good for your plants, so I did it, it seems to attract me, very good, hope it can help plants, so oh, I also want to mention that many people grow pepper in these solo cups so I want to try a bit,

 

You will see there are two solo cups here. What people did was they took the first cup, cut some fairly large holes in the bottom f, or pulled out the rhizomes, and then added water and nutrients to the bottom cup. The rhizomes stick out from the bottom without hovering in the pot, just like I'm sure many of them you can't see them, but if you take it out of the pot, take it out, you will find that there are many roots starting Coiling, causing the root system to take root, it is difficult for the plant to get nutrients, so what I am doing, if the plants look unhealthy, then what I am doing is pour them into a solo cup to see if it can help the plant to regain growth, you can still See more information here.

 

My luck with the sugar factory is not very good. I only have two sugar factories. They "are not the healthiest plants, so I put it in a separate cup, hoping that it can be restored to its original state, but you can see The leaves are very yellow, but they have just fallen off, but I hope they can return to their original shape after putting them in this container, so they look more beautiful. I also want to mention that many grown-up peppers grow out of these solo cups , So I think I’ll give it a try and you’ll see that there are two solo cups inside, what people do is they take the first cup and cut some pretty big holes in the bottom to let the roots come out, and then In the bottom cup, they add water and nutrients to the cup. This is the way to feed the plants. This allows the roots to stick out from the bottom instead of coiling in the pot, as I'm sure, many of them are not visible But if you take it out of the pot, you will find that there are a lot of roots that start to coil around, causing the root system to take root and it is difficult for the plant to get nutrients, so what I am doing is, if the plant starts to look unhealthy, then What I am doing is pour them into a Solo cup and see if it will help the plant to recover, you can see more of them here.

 

My luck with the sugar press is not very good, I only have two sugar squeezed plants, they are not the healthiest plants, so I put this one into Solocups, I hope it will recover, but you can see The leaves are very yellow, but they just fell off, but I hope they will recover after putting it in the container, so the pepper is very worthy of appreciation, I may post another update on Tomatosoon

 

For LED planting, I strongly recommend the LED grow light I bought. It is VANQ T8, which is very suitable for the spectrum required by seedlings and plants during growth. If you are interested, please click the link below:

https://www.vanqled.com/

Test the lighting effects of COB and LED household bulbs

Hi everyone, I did a little experiment here a few days ago and my corn cob arrived. Therefore, we recommend two of them, so my experiment is to use one and use household LED lights as a supplement. Only use this light.

Its power is 120 watts, which is very good because they are cool, do not consume a lot of power, and are very cheap. I only use the hemp LED grow light here because it doesn't have more, but I will get more. This clone is a Perps clone of Canuck Seed's second-generation grandparents.

It drove well. It has been flowering for 10 to 14 days. We made some very light lollipops at the bottom, without too many free radicals, so you know there is enough circulation of air and light. The purpose of these guys is to let light flow through the whole plant. This is a 4×4 tent. I think she will account for a lot. Just to give you some comparisons. This is one of the plants. Clone, the flowering period is very late, most of the time is used under VANQ CLTW050, plus these full spectrum lights, these lights are 50 watts LED bulbs, I have a bulb in every corner, their purpose is to make her full To bathe. You know, from her point of view, she is a bit malnourished, so some flower buds are so airy, but from now on, I will delete I give comb AG, which contains a small amount of nitrogen, and try to add salt.

You at least know the possibility of at least stopping the rotation, because you can see that it is not so dense at all, but within reach, she is a beautiful plant, I don’t have a purple fan, but it’s good, but you will see Until it is 1/10 the same as other signals. This is a late flower, so you can now know that the signal is much larger.

The advantages and disadvantages of cultural indoor LED

Welcome, the subject of this article is the drawbacks of indoor culture​​. The first advantage of LED. energy efficiency. The life span is about 40,000 hours. The title of the letter information. The bulb compact fluorescent lamp provides approximately 10,000 light hours compared to 2000. The external power and the efficiency of 1000 incandescent lamps are also obvious, that is, compact fluorescent lamps with 70 cycles per watt greater than 40 to 80 lumens per watt, but compact fluorescent lamps are also ecological, so they must have good output, but on the other hand, Incandescent lamps provide 16 lumens per watt. The advantage of LEDs is that they have lighting quality from the moment the power is turned on. The LED panel will provide everything to follow the requirements of maximum brightness, now is not the time to wait for this loan or to illuminate our culture little by little. It is better to illuminate the living room, it is better to turn on the maximum power immediately, rather than really interesting to us, the main spectrum of the aircraft needs life is red to blue, we found that almost all high-quality LED panels these The mixture of red and blue makes the color purple, which is why you see the purple letters, because this is a good life and the mixture of red and blue needs to be hidden. The price back then was much more expensive than today, which means it is much cheaper now. Accessibility also increases with the increase in quality and functionality, so we can allow more and more people to turn to this lightweight medium-sized expandable bulb. HPS dominates. In fact, this is where it generates high energy. Two short waves are what makes plants perceive. Coupled with these photons there, when their pupils are created, they can suddenly and deeply absorb tissue. Low-energy photos and longer wavelengths.

Therefore, plants will absorb them-even if you will get more led lights 600 watts hps 600 watts ugly lights, you will also have more led lights, but in the case of hp, this light will not be s Absorption, this phenomenon will prove that the LED has been used many times. On the other hand, during the plant growth stage, growth increases the proportion of calyx leaves and produces smaller plants, but in terms of timing, it is more clumpy or blooms on the green screen. On the other hand, HP will provide the best The Harvest, and then I will show you whether you like achps or LEDs. However, if you choose leadership and ward, you will choose very ugly growth and powerful features. There is no reverse. In cold weather, it is necessary to turn up the heating, because students do not need it. Heating is used to heat the room. On the other hand, in summer, due to leadership and rebirth, sufficient culture is more practical because it does not heat or hardly needs to heat the cultivation room for ten years, and the HPS lamp (if outside) is already between 30 and 35 degrees, We have increased the horsepower by 400 to 600 watts, which will generate a lot of heat. In this case, it is better to take advantage of our shortcomings. For example, in my case, the panel may be noisy, for example, I have a panel, So it can help 300 watts x 3 watts have 3 vise, 3 small vise fans are connected to the radiator, so it is actually not that the LED heats too much. This is absolutely necessary to cool them and the fan. The radiator is not a softening gun. If you strip them off, the help will still be a bit hot, but most importantly, they are very close and give them very close relatives and can still be tied up and sold. The space between these LEDs is not large enough. No cooling system is used. Effective cooling will not reduce overheating, but it will help extend the life of the LED. 47.6 Helene (Hélène) reduces the life span of people. These letters become opaque. Knowing that its power is from 3 watts to low energy consumption, light can be reduced.

If 10 15 20% is taken away due to poor heat dissipation, then it becomes a more effective price, which causes me trouble. I paid or paid 70 euros. The 300 watts you wrote on Amazon. My indoor culture doesn’t help. Say 200 watts, 300 watts, 400 watts, and 600 watts are really the best for me. I tested it really takes so early. After I couldn’t test the hp light, I couldn’t tell if it was better, but in fact, it just means that the basic leader has the same price, but consumes less energy and less energy. They can also be cooled because we use horsepower to cancel cultivation cooling and consume energy again. The fan overheats the cultivation room and most of the energy is converted. Heat and not be affected by light and life, especially because you need to understand that even if the light bulb work culture makes you a culture, the light bulb will always light up, and then say useful actions for the next season, you should know every She will lose 10% to 30% of her energy the next time she closes the door. Saying whether the light bulb is effective is always the next time you will use the same language in the analog output to reduce the gain, and the letters of the led will last 10 times your ps2 age, so you do not need to change every two and three cultures. The lamp and output will remain approximately the same each time. The culture is reduced to less than the horsepower of the lamp. What is the noise that LED makes? 326 The noise of 3 small fans is as loud as that of a tractor. The air extractor or half power will speak, so it’s a bit like when you want to choose some noise, economical and prudent choices are also good for CFL. It also provides men, lovers, even if it is not as good as the leader, when I test the arch ps, I will make a small video for you, the theme is luxury, so I will test the student council to test the gasoline culture of Arkansas b and c. I am making a video, this is where I try to reduce the weight by ten or twenty thirty centimeters. With age, ps is led by compact fluorescent lamps.

Cannabis LED Research Diary

We are the only vertically integrated cannabis operator in San Diego County. We do operate dispensaries, but we focus on the medical side and expand this part of our business and put one of the best products we can offer on the market, we know The thing is that LED is the future of the industry. We have an extraordinary team. I have a few PhDs leading the scientific director.

Marcus Rogan leads the extraction laboratory operations and PhD. The planting research led by Allison tried our planting strategy. We followed the guidance of commercial gardening, took the method from there, and planted marijuana indoors. There are very few studies currently conducted, and we have certainly Haven’t done much yet, so you must have enough energy to conduct explosive research. The guidance box can prove that some of the contents can indeed share some data with other growers. Therefore, it is huge to be able to run the LED intensity test smoothly. There will always be questions in the world, just like when Josh came to me, the candy was blooming under the LED. When asked if I wanted to conduct an LED experiment, I said that it absolutely depends on how the light intensity affects the growth and development of plants. The distribution of cannabinoids has not been really studied in photobiological research, especially there are few reports on cannabis, but we found that the weight of pruned flowers increases linearly.

400 to 1200 micromol, however, the largest increase is between 400 and 600 micromole, where at higher light levels between 800 and 1,200 micromole, the content of the flower increases by 51%, pruning at a distance This experiment shows that LED lamps that can increase the output by increasing ppfd are 12% higher than HPS lamps in full active cannabinoids. This is because we have obtained huge results from energy flux lamps, and we Data that can be collected. Now we want to implement our entire facility in LEDs, more specifically, we want to achieve double stacking. We hope that such benches can bring us 2.5 square feet of area. We want to grow high-quality Products, and to do this, we need to conduct the latest research on the latest technology so that Elko and fluencerelationship will only develop from here if the company plans to expand the planting area. Science has proven that we should have an impact on us